Filter
Top Products
ES 3037/3037e Operation • 116
1. Select Proof and Print.
2. Enter a job name of up to 16 characters under Job Name
Setting and a four digit personal ID number.
3. Click Print to proceed with your print job. Print the document
from the software application being used. The document will
be stored on the printer’s hard disk and one copy will print for
your perusal.
4. After checking the proof, you then will print or delete (if
incorrect) the remaining copies of the document using the
procedures given below.
Printing copies from Proof and Print
1. Press the MENU button to access the PRINT JOBS MENU,
then press the SELECT button.
2. Enter your personal ID number using the buttons on the
printer control panel.
3. Press the VALUE button until
ALL JOBS or the required
job name is displayed.
4. Press the SELECT button to print the remaining copies of
the document.
Deleting copies from Proof and Print
If the proof is not ready for printing, the job must be deleted
from the printer:
1. Press the MENU button to access the PRINT JOBS
MENU and press the SELECT button.
2. Enter your personal ID number using the buttons on the
printer control panel.
3. Press the VALUE button until
ALL JOBS or the required
job name is displayed.
4. Press the CANCEL button to delete the remaining copies
of the document.
5. When the deletion confirmation message appears,
confirm by pressing the SELECT button.