Filter
Top Products
22 ML3320/21
This feature is normally turned off. To activate it:
1. Press SHIFT (➋) + SEL (➊).
2. Press GROUP (➌) until one of the following lines
appears, depending on which paper feed you are using:
REAR FEED Form Tear-Off OFF
BOTTOM FEED Form Tear-OFF OFF
3. Press SET (➍) until the time interval you wish to select
appears in the third column.
4. Press SHIFT (➋) + SEL (➊) to exit Menu Mode and
save the setting.
Note: Some programs pause occasionally while sending
data. If the pause is too long, the paper will advance
to the tear-off position until more data is received.
This extra paper movement can cause uneven print
registration in graphics. If you have this problem,
use the menu to turn off this feature.
Paper Park Feature
To retract rear-feed paper from the paper path, press PARK
(➊).
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT TOF
Micro Feed
Up
Micro Feed
Down
➋➍➌➊
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT TOF
Micro Feed
Up
Micro Feed
Down
➊
3320hlp3.pm6 13/03/96, 16:0122