Filter
Top Products
E-20 Section 3
Control Panel Buttons: Print Mode
PRINT QUALITY
CHARACTER PITCH
HSD
UTILITY
NLQ
10
12
15
20
PROP
17
RESET
SEL
SEL
POWER
LF
FF/LOAD
TEAR PARK QUIET
SHIFT
Micro Feed
Down
TOF
Micro Feed
Up
EXIT
GROUP
SET
PRINTITEM
ALARM MENU
MENU
Press to set character pitch, indicated
by lights (10, 12, 15, 17, 20, PROP).
Retracts continuous-form paper from path.
Press to load/eject single sheet, or to move continuous-form paper to print position.
Printer deselected: press with SHIFT to move TOF down.
Used with other buttons to set TOF.
Press with SEL to enter Menu mode.
Moves continuous-form paper up for
tear-off or back down for printing.
Press to move paper up a line.
Hold for repetitive line feeds.
Hold on power up to start Font test.
Press to turn Quite mode On (light glows) and Off.
Printer deselected and no paper loaded: press with
SHIFT button to reset TOF to default
Hold on power up to start Rolling ASCII Test.
Press to set print quality, indicated
by lights (HSD, UTILITY, NLQ).
Press to select (SEL glows)/deselect printer.
Press to reset paper alarm (ALARM glows).
Press to end printer tests.
Press with SHIFT to enter Menu mode.