Filter
Top Products
E-ii
• If you’re using an extension cord or power strip with
the printer, make sure that the total of the amperes
required by all the equipment on the extension is less
than the exten-sion’s rating. Generally, the total
ratings of all equipment plugged into any one power
line should not exceed 15 amps. Don’t exceed this
unless you know that the power line your equipment
is plugged into has a rating above 15 amps.
• Aside from the routine maintenance described in this
handbook, don’t try to service the printer yourself;
opening the cover may expose you to shocks or other
hazards. Don’t make any adjustments other than
those outlined in the manual — you might cause
damage requiring extensive repair work. the
Warranty, Regulatory, and Safety Information booklet
supplied with your printer explains how to get your
printer serviced by qualified Okidata technicians.
• If anything happens that indicates that your printer is
not working properly or has been damaged, unplug it
imme-diately and follow the procedures in the
Warranty, Regulatory, and Safety Information booklet
supplied with your printer for having your printer
serviced.
Some of the things to look for:
- The power cord or plug is frayed or damaged.
- Liquid has been spilled into the housing, or the
printer has been exposed to water.
- The printer has been dropped or its cabinet has
been damaged.
- The printer doesn’t function normally when
you’re following the operating instructions.