Filter
Top Products
|
T.37 Option Guide: English 57
1 Press Menu/Exit to enter the menu.
2 Press ᮢ to select Location Program. Press Enter.
3 The cursor will be at Speed Dial. Press Enter.
4 Input the speed dial number you want to program, then
press Enter.
!
E-mail addresses can ONLY be programmed in Speed
Dials 1 - 50 (5780) or 1 - 90 (5980).
5 Press ᮢ to select e-mail Address. Press Enter.
6 Input the e-mail address. Press Enter.
!
One-Touch Key 32 is the @ symbol.
Use One-Touch Key 31 (Caps) to switch between upper
and lowercase letters, if necessary.
7 The display shows TIFF or PDF. Press Enter.
8 The display shows SENDER ID (EMAIL) AT TOP. Press
Enter.
9 The display shows RETURN RECEIPT (MDN). Press
Enter.
10 Repeat the above process from Step 4 until you have
finished programming.
11 Press Menu/Exit to return the machine to standby mode.
12 When finished with the programming of One Touch
keys, lift off the plastic cover. Use a pencil to write the
name of the One Touch key you have programmed.
!
Print the Telephone Directory when you finish
programming. This provides a reference of the Speed
Dial numbers already programmed.
See the User’s Guide, “Reports, Telephone Directory.”
Be sure to write the name for any Speed Dial numbers
you program on the One Touch Sheet(s).