Filter
Top Products
OKIPAGE 10ex, 12i/n20
2. Remove the new image drum from the package.
3. Remove the protective paper.
4. Install the new image drum cartridge into the printer placing
the alignment pins on each end into the slots in the printer.
5. Remove the shipping insert from the toner well and discard.
Reset the drum counter (see below), and install a new toner
cartridge following the instructions in the previous section.
Resetting the Drum Counter
After replacing the image drum cartridge, reset the drum
counter to keep a correct count of the number of pages printed
on the image drum.
1. Turn the printer on while holding the MENU 1/Menu 2
button.
USERMNT
displays in the control panel window.
2. Press MENU 1/Menu 2 three times.
DRUM CNT RESET
displays.
3. Press ENTER. The counter will reset and the printer will go
ON-LINE
.
10exuGB.p65 28/09/98, 11:4920