Filter
Top Products
OKIPAGE 10ex, 12i/n24
Memory has overflowed for one of the
following reasons.
• Too much data on page.
• Too much macro data.
• Too much DLL data.
Press RECOVER to continue. Install extra
memory or reduce data on page.
The receive buffer memory has overflowed.
Press RECOVER to continue. The PC
ignores printer busy signal in the interface,
check cable pin assignments.
Print processing speed could not follow the
paper feed speed. Press RECOVER to
continue. Simplify page formatting data or
select Page Protection menu.
Indicates an error in the network or RS232C
interface. Check protocols of printer and
host. Press RECOVER to continue.
Message Status Message Status
Indicates that TONER LOW has been
exceeded and the cartridge should be
replaced.
Wrong paper size found. Open and close
printer cover to continue. Check paper size
or paper double feed.
Paper jam found, when fed from paper tray.
Check paper in the tray. Open and close
printer cover to continue.
Paper jam found, during paper feed.
Remove misfed paper and close printer
cover to continue.
Paper jam found in paper exit area. Open
printer cover, remove paper, close printer
cover to continue.
Settings Menu.
Ready
MENU
Ready
tttttt
EXIT JAM
Ready
tttttt
FEED JAM
Ready
tttttt
INPUTJAM
tttttt
SIZE ERR
Ready
Ready
TONER
EMP
HOST I/F
ERROR
Ready
PRINT
OVERRUN
Ready
REC BUF
OVERFLOW
Ready
MEMORY
OVERFLOW
Ready
10exuGB.p65 28/09/98, 11:4924