Filter
Top Products
User’s Guide 25
English
Cover is open. Press down firmly to close.
EEPROM ID check error. Press RECOVER
to reset EEPROM to factory default.
Abnormality found in the printer. Switch
printer off then on again to clear, if problem
persists, contact service representative.
Abnormality found in the controller. Switch
printer off then on again to clear, if problem
persists, contact service representative.
aaaaaaaa = error address
Flash SIMM sum check error.
Displayed in window for one second after
switching on power, for test purposes.
Printer is in initialization mode after
switching on, prior to on- line mode.
Printer is requesting RESET button to be
pressed for more than 2 seconds, to write
new menu data to EEPROM.
Message Status
Ready
ERROR 0n
aaaaaaaa
Ready
ERROR nn
EEPROM
RESETING
Ready
COVER
OPEN
Ready
Ready
Ready
INITIAL-
IZING
Ready
RESET TO
SAVE
SIMM-ROM
ERROR
Ready
10exuGB.p65 28/09/98, 11:4925