Filter
Top Products
17
ENGLISH
1. Control lock key position: PRG.
2. Type the required HDLO code [0 to 6] with reference to
the table above.
3. Type the required discount or add-on status
or
.
4. Press .
Example: Allocate a maximum of 5 digits and a discount
status to this key.
Type/Press:
Consecutive Receipt Number Programming
To program consecutive receipt numbers:
1. Control lock key position: PRG.
2. Press:
and then
.
3. Enter a [Receipt number from 1 to 9999].
4. Press
.
Z1/Z2 Counters
To program the Z1 and Z1 counters:
1. Control lock key position: PRG.
2. Press:
for Z1 counter or for Z2 counter.
3. Enter [4-digit counter number from 0001 to 9999].
4. Press
.
Changing the Cash Register's Standard Settings
1. Control lock key position: PRG.
2. Type the [number] of the system option (1-96 as indicated
in the table) that you wish to change.
3. Type the [number] of the required setting.
4. Press
.
Example: Program the cash register to issue multiple receipts.
Type/Press:
HDLO code
Discount status
System Options
Your cash register's system options programming feature
includes a number of options for the operation of the cash
register. Each of the functions described in this section is
already set upon delivery of the cash register to meet the
most frequent requirements.
The cash register's factory default settings, which you can
reprogram at any time, are indicated in bold print in the table
below. You can, at any time, print a report indicating how your
cash register is programmed. See " Cash Register Program-
ming Report" for details.
1 Set date format
0 = Month/Day/Year
1 = Day/Month/Year
2 Set time format
0 = 24 hour format
1 = 12 hour format
3 Key touch-tone
0 = Enabled
1 = Disabled
4 Electronic Journal activation
0 = Standard electronic journal
1 = Dynamic electronic journal
5 Clerk System activation
0 = Disabled
1 = Enabled
6 Compulsory clerk secret code entry
0 = Disabled
1 = Enabled
7 Compulsory clerk secret code entry at each
transaction
0 = Disabled
1 = Enabled
8 Clerk login displayed when register is idle
0 = Enabled
1 = Disabled
9 Winding motor flag (excl. REG and MGR modes)
0 = Enabled for only EJ report
1 = Enabled for PRG, X and Z modes
10 Reset consecutive receipt number after Z1 report
0 = Enabled
1 = Disabled
11 Reset Grand Total after Z1 financial report
0 = Disabled
1 = Enabled
12 Reset Z1 and Z2 Counter after Z report
0 = Disabled
1 = Enabled
13-14 Reserved
15 Post transaction tenders
0 = Enabled
1 = Disabled
16 Zero price registrations
0 = Enabled
1 = Disabled
17 Tax calculations
0 = Reserved
1 = Add-on tax calculation
2 = VAT calculation
System option
Setting
Confirm
setting