Olympus P-10 Printer User Manual


 
5
Safety precautions
PreparationPrintingFor Your
Information
Introduction ENGLISH
WARNING
J If this device acts abnormally, unplug it
Do not use the printer if it emits smoke, unusual smells, strange
sounds, or becomes unusually warm.
Use under these conditions may cause fire or electric shock.
Turn off and unplug the printer. Then contact your nearest
OLYMPUS service center.
J Should any liquid or foreign objects get into the printer, unplug
the power cord
Do not allow any liquids, metals, or flammable objects to get into the
printer through the ventilation holes.
This may cause fire or electric shock.
Turn off and unplug the printer. Then contact your nearest
OLYMPUS service center.
J If the printer cabinet is damaged, unplug the power cord
Do not use this device if the cabinet (body) is damaged.
Use in this condition may cause fire or electric shock.
Turn off and unplug the printer. Then contact your nearest
OLYMPUS service center.
J If the power cord is damaged, unplug it
Do not use a damaged power cord.
Use in this condition may cause fire or electric shock.
Turn the printer off, and unplug the power cord being careful not to
touch any exposed wires. Then contact your nearest OLYMPUS
service center.
p10_e_000_bookfile.book Page 5 Monday, December 15, 2003 11:51 AM