Filter
Top Products
55
C. Registering the Background Image
This procedure is used to register settings related to the shading and filter to be used with the
background image.
1
Select whether or not to register the
background image using the left and right
arrow buttons.
The display changes as shown below each time
the left or right arrow button is pressed.
2
Press the OK/SELECT button.
If “YES” has been selected, registration of the
background image begins and that progress is
displayed.
The registered background image is displayed
for about 2 seconds and then the display
returns to the Setup menu.
YES NO
Tip
• If you do not want to register the background
image, select “NO” and press the OK/SELECT
button. The display returns to the Setup menu.
➜
➜
Caution
• The amount of time that it takes to register the
background image differs depending on the
size of the image and the degree of detail of
the pattern. Some images may not be
registered depending on the size or pattern.
• The number pixels of pictures registered for
background should be an even number both
vertically and horizontally.
• Do not remove the xD-Picture Card or the PC
card before registering the background image
is complete.
Input Selection Paper Selection Picture Selection Printing ModesSetup
POWER ON