Filter
Top Products
12. UNIT OF MEASURE:
This is 3 bytes. It is ASCII value of unit of measure.
13. GA
TE TIME(For FP model only):
This is 1 byte from 00 to FF.
For value = 00 to F
A:
Each count equals 10ms. If 0 then gate time = 3ms.
Example : 1 second gate time = 64 hex.
For value = FB to FF:
Value Gate time
FB 5 seconds
FC 10 seconds
FD 20 seconds
FE 40 seconds
FF 80 seconds
14. DEBOUNCE TIME(For FP model only):
This is 1 byte from 01 to FF.
Each count equals 5ms. If 0 then error.
15. TRANSMIT TIME:
This is 2 bytes data in second and specifies the time of the transmission by the meter.
Page 15