Filter
Top Products
Klinkmann Automation Omron Ethernet DAServer 31
Omron Ethernet DAServer Ver 1.x User Manual Rev 1.3 17014m13
1. Right-click anywhere in the Device Items dialog box.
2. Select the Clear All command from the shortcut menu.
• All the device items listed in the dialog box, including their corresponding actual PLC
item names, will be deleted.
To export device items
When you have a list of device items that needs to be archived, use the Export feature in
the Device Items dialog box to archive the list.
1. To save the list, right-click anywhere in the Device Items dialog box.
2. Select the Export command from the shortcut menu.
3. Select the folder into which the list is to be saved.
4. Name the list to be archived.
5. Click the Save button.
• The whole list will be saved as a .csv file in Excel.
To import device items
The Import feature in the Device Items dialog box is used to bring an archived list of
device items into the dialog box, when you need to utilize or reconfigure any of the device
items on the archived list.
1. To import the list, right-click anywhere in the Device Items dialog box.
2. Select the Import command from the shortcut menu.
3. Select the archived list (.csv file) to be imported from the folder in which it is saved.
4. Click the Open button.
• The whole list will be brought into the Device Items dialog box.
Note: When the list to be imported contains duplicate names as found in the current list
but the Item References are different, a dialog box will appear to prompt you to make a
selection.
Hot Configuration
The Omron Ethernet DAServer is hot-configurable. The following hot-configuration
functionality is incorporated in Omron Ethernet DAServer:
• Modifying Global Configuration parameters.
• Adding, deleting, or modifying device nodes (without affecting any other device nodes,
excluding the children of the modified device nodes).
• Adding, deleting, or modifying device groups.
Limited support is provided for the hot configuration for the server-specific configuration
parameters in this release. You can modify server-specific parameters while the server is
active. However, to have those changes take effect, you have to restart the DAServer.
Note: If changes are made to server-specific parameters while the server is active, the
DAServer will issue a warning message to the logger.