Filter
Top Products
MGW 2000e Quick Start Guide
2
MGW 2000e Components
Chassis Components Description
MGW 2000e chassis ‘Housing’ of the MGW 2000e system.
Power cord that fits your local Din
socket.
Connects to MGW 2000e's power
connector
(not supplied by Optibase).
Network cables - shielded category 5 Connect MGW 2000e's NICs A and
B to two different network segments
(not supplied by Optibase).
19”, 23” or ETSI mounted bracket Rack-mounts MGW 2000e.
RS-232 cable Connects PC to MGW 2000e.
USB disk The USB disk is optional. It connects
to MGW 2000e and provides space
to store video clips
(not supplied by Optibase).
Encoding Modules Description
MGE-100 Encodes video from Composite and
S-Video sources at SIF and QSIF
resolutions and audio from
unbalanced audio sources.
MGE-200 FD1 720 Encodes video from Composite and
S-Video sources at SIF, QSIF, HD1
2/3 D1, 3/4 D1 and FD1 resolutions
and audio from unbalanced sources.
MGE-200D FD1 720 Like MGE-200 FD1 720, but encodes
SDI video sources and unbalanced
and AES3 sources.
MGE-200 Low Latency Supports Optibase's low latency
optimized microcode for encoding at
a reduced latency.
Encoding Module Components Description
Video BNC cable Connects a Composite or SDI
source.
S-Video MiniDIN cable Connects an S-Video source.
Audio Stereo MiniJack cable Connects an unbalanced source.
RCA Coaxial cable Connects an AES3 source.
Table 1: MGW 2000e Components