Filter
Top Products
Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner
Motor Speed in Sleep Mode
In the default setting, when the scanning is in the Sleep Mode, the motor is Off.
To provide a faster “wake up” when an object is sensed, the motor can be set to run at
normal speed or at half speed. At either speed the laser is Off.
To allow the motor to continue running at normal speed, ignore the “Disable Motor
When Idle” programming command in the sleep mode programming sequence.
To allow the motor to continue running at half speed, use the following programming
command instead of the “Disable Motor When Idle”(4Z) command in the sleep mode
programming sequence
.
CCB
Motor at ½ Speed When Idle (BBA)
Page 141