Filter
Top Products
Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner
Chapter 4
Programming the Scanner
General Information
This chapter contains information that allows you to easily change certain programmable
parameters of the scanner. A specific parameter is set or changed by scanning one or
more of the special programming bar codes in this manual. For each parameter, you can
choose from a menu of options. When you scan the special bar code for specific menu
options, the scanner retains the changes you have made. The changes are kept even if
you disconnect the scanner or turn off power.
Chapter 5 contains the options and programming bar codes that allow you to change or
select specific bar code symbologies.
Chapter 6 contains the options and universal programming bar codes that control the
general operation of the scanner regardless of the interface or the symbologies selected.
Chapter 7 includes miscellaneous commands and options that may be useful in some
applications.
Step by Step
Programming is easy. Simply follow this sequence:
1. Scan the bar code for “Start/Stop Programming Mode” The scanner will emit a
continual sequence of slow beeps indicating it is ready to be programmed. When in
Programming Mode, the scanner can not read normal bar codes. It can only read the
special bar codes found on the following pages.
Page 26