Filter
Top Products
Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner
Chapter 3
USB Interface
This chapter contains information on setting up your scanner with an USB interface.
The RS232 scanner cable is terminated in a Type A USB connector. The external power
supply (+5VDC) is necessary. There is a pig tail adapter with the power supply jack
leading to the USB connector
Plug the scanner into a USB port on your host computer. The PC must be running
Windows 98 (or iMac Rev A) or higher. The computer will sense the presence of the
scanner and load any required software driver.
Reset All Defaults - USB
TV Reset all defaults - USB (SU)
Reset All Defaults USB (SU)
Page 25