Filter
Top Products
GB
GB
Press SNOOZE (→ p.5,M.) to temporarily stop the alarm. The alarm
will sound again after 8 minutes unless another key on the clock is
pressed. To stop the ringing completely, press ALARM.
The Single Alarm will automatically disable itself after the
clock has gone off at the preset time. The Weekday Alarm
will still be enabled even after the alarm has gone off.
OTHER FEATURES
LOW BATTERY WARNING
When the battery is low, a battery icon will appear on the main unit s
LCD screen.
TROUBLESHOOTING
This section includes a list of frequently asked questions for problems
you may encounter. If your device is not operating as you think it
should, check here before arranging for servicing.
Problem Symptom Check This Remedy
-
displayed on
LCD screen.
The remote
signal
cannot be
received.
Obstacles (either
electromagnetic
interference or
objects) are
barring the
remote signal
from reaching
the main unit.
Move the main
unit away from
any sources of
interference,
including other
electronic
devices. Also
try moving the
remote and the
main units
closer.
Batteries of
the remote
unit are low.
Check LCD
Display of the
remote unit.
Install new
batteries into
the remote unit.
22
NOTE
LCD Display Description
When the indicator appears on the top line of the
LCD screen, the remote unit battery is low.
When the indicator appears on the bottom line of
the LCD screen, the main unit battery is low.
23
Measurement
does not
seem
accurate.
Displayed
temperature
data are
different
from other
measuring
instruments.
The measurement
method is
different.
The temperature
resolution for
different
products may
also be different.
The areas under
evaluation are
different or are
influenced by
climate.
Place the 2
instruments very
closely for a time
period (no less
than 30 minutes),
avoiding direct
light and air
movements.
Discrepancies
between
remote and
main unit
readings.
Another
remote
sensor is
using the
same
frequency
and ID Code.
Check if another
remote sensor is
present within the
area.
Place the remote
sensor closer to
the main unit.
Recalibrate the
units to ensure
synchronization.
EMR898_GB(02/05) 12/1/03, 10:36 AMPage 24-25 Adobe PageMaker 6.5C/PPC