Filter
Top Products
2 - 2 Trumpcard Ethernet LAN
Section Two
Installing the Trumpcard Ethernet LAN
The Trumpcard Ethernet LAN can be inserted into a computer whether the
power is ON or OFF.
Follow these steps:
• Orient the Trumpcard so that the 68-pin connector is next to the
PCMCIA slot of the computer.
• Insert the Trumpcard into the slot until it is firmly seated.
Note: These are general installation instructions that apply to most
computers. Please refer to the manual accompanying your computer
for any additional instructions on installing PC Card adapters.
Note: The Trumpcard is keyed to go in one way only. If you feel resistance
before it is fully inserted, remove it, turn it over, and re-insert it.
Installing the Trumpcard