Filter
Top Products
3 - 16 Trumpcard Ethernet LAN
Section Three
Change the second line above to:
DEVICE=C:\<path>\OTCETH.DOS <-- DOS
or
DEVICE=C:\<path>\OTCETH.OS2 <-- OS2
Save the changes made to this file.
7. Next, edit the PROTOCOL.INI file, the file will be in the <path>
directory.
In this file under the heading [ELNK_NIF] please change the line
DRIVERNAME=ELNK$ to read DRIVERNAME=OTCETH$
Also remove any existing settings under this line(i.e. INTERRUPT,
IOADDRESS, DMACHANNEL, etc.)
Remove any keywords that were for the 3COM Etherlink driver. Add
any required settings using the keywords described in Appendix
B. Save the changes made to this file.
8. Finally, place a copy of the Trumpcard NDIS Device Driver
(OTCETH.DOS from the \DOS subdirectory or OTCETH.OS2 from
the \OS2 subdirectory) on the Trumpcard driver diskette to the
directory on your hard disk drive that contains your Network files
<path>.
Your Network installation is now complete.
Note: Keyword specifications associated with the NDIS driver are explained
in Appendix B, Error Messages in Appendix C.
Novell Netware for DOS
Depending on the version of Netware, the installation of the Ositech
Trumpcard ODI driver will be done automatically or must be done
manually.