Ositech comm 614006-001 Network Card User Manual


 
User’s Guide and Reference 3 - 5
Operation
7. Complete NETSETUP and return to the DOS prompt. The
PROTOCOL.INI file in your DECNET directory should appear
something like the following:
[protocol manager]
DRIVERNAME=PROTMAN$
[IPX4MAC]
DRIVER=IPX$MAC
BINDINGS=OTCETH.DOS
[DATALINK]
DRIVERNAME=LL$MAC
LG_BUFFERS=16
SM_BUFFERS=6
OUTSTANDING=32
HEURISTICS=6
BINDINGS=OTCETH.DOS
[OTCETH.DOS]
DRIVERNAME=OTCETH$
Your CONFIG.SYS file should contain the following lines :
DEVICE=C:\DECNET\PROTMAN.SYS /I:C:\DECNET
DEVICE=C:\DECNET\OTCETH.DOS
Your AUTOEXEC.BAT file should contain the following line:
CALL \DECNET\STARTNET
Note: Keyword specifications associated with the NDIS driver are explained
in Appendix B, Error Messages in Appendix C.
FTP Software LanWatch
The Ositech Trumpcard hardware and software supports promiscuous
mode operation, allowing it to work with products such as FTP's LanWatch.
The Ositech Trumpcard NDIS device driver installation will be automated
to work with LanWatch once copied over to your hard disk.
1. Create a directory on the C: drive called NDIS (i.e. MD C:\NDIS).
2. Copy the files OTCETH.DOS and PROTOCOL.INI from the \FTP
directory on Trumpcard driver diskette to \NDIS directory on C:
drive (i.e. COPY A:\FTP\OTCETH.DOS C:\NDIS).
3. Run LANWatch install program (i.e. INSTALL).