Filter
Top Products
3 - 22 Trumpcard Ethernet LAN
Section Three
• One blank 3.5 inch high density (1.44MB) diskette libelled
“Ositech Trumpcard LLI Driver Disk”.
• IO port and IRQ that you wish to assign to the LAN function.
You can use
hwconfig
to see what devices are currently
configured into your UNIX system. The LAN will need 32 ports
(default of 0x300-0x31f).
• A 4K memory window that you can assign to the driver in the
range of 0xc0000 and 0xf0000. The default is 0xc8000.
• Ability to use
netconfig
to configure the Network software.
• 2MB of free disk space for the various temporary files that are
created during the install process on the file system
containing the /tmp directory.
To create the Ositech Trumpcard LLI Driver install diskette, and to install
the driver, you need only execute the INSTALL shell script that you have
copied to the /tmp directory. You can only execute the INSTALL script
after you have become the root user.
Note: It is highly recommended that you run the shell script as root, in
single-user mode, because the installation process will require that
you relink the kernel.
$su
enter the root password at the Password: prompt
If you are not already in the System Maintenance mode, use the
following command to reboot the machine:
# /etc/shutdown -i1
INIT: SINGLE USER MODE
Type CONTROL-d to proceed with normal setup,
(or give root password for system maintenance):
enter the root password to activate the System Maintenance
mode
# cd /tmp
# sh install
Then simply follow the instructions provided by the installation script to
complete the installation of the driver.