Filter
Top Products
Lighting Controls
C
21
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
MURAL
®
LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz
Commercial Grade Lighting Controls
SPECIFICATIONS AND FEATURES
• Responds to lighting level commands sent by the Cat.
No. MN00C-1LW Scene Controller. Users can program
the desired lighting level for individual Mural Scene
Dimmers in up to seven distinct lighting scenes, which
are easily accessed by one or more Scene Controllers
• Smooth ON/OFF and Dim/Bright Decora rocker action
provides ease of operation for people of all ages and
abilities
• Scene Controller also provides an OFF button and two
arrow-shaped buttons for group Dim and Bright control
• Local Dim/Bright adjustment on individual scene dim-
mers will not affect programmed scene lighting settings
• Compatible with Scene Enhancement Products includ-
ing Contact Closure Interface, Infrared Hand-Held
Remote and Infrared Receiver, and one-way and two-
way Signal Repeater
• Streamlined, popular Decora styling enhances any inte-
rior and adds a “family look” when ganged with any
Decora device
• Digital circuitry provides SOFT-ON/FADE-OFF operation
for an eye-pleasing effect and prolonged lamp life
• Square green LED display alongside rocker indicates
selected brightness level
• Locator LED illuminates when lights are OFF
• Color change kits available in a wide range of choices,
making it easy and economical to change decorating
schemes
• Color change kits simplify inventory for distributors and
contractors who can offer a complete range of colors
without stocking a different device for each one
• Minimum Brightness Adjustment sets comfortable min-
imum light level
• Protected memory and voltage compensation maintain
light levels after power outages and during minor power
fluctuations
• Built-in radio/TV interference filter
• ON/OFF AC air-gap switch completely disconnects
power to unit for bulb changing or removal from service
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year warranty
*COLOR
To order colors, add suffix to basic catalog number.
Colors in parentheses must be ordered as Color
Change Kits. Color suffixes are: Ivory (-I), White (-W),
Almond (-A), Gray (-G), Black (-E) and Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Use Leviton Power Extenders to extend
the load capacity of box-mounted dim-
mers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10
™
Powerline
fluores-
cent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7
™
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
Mural Scene Capable Decora-Style Digital Dimmer
Compatible with Scene Controller and Scene Enhancement Products — See page C22.
Mural Scene Capable Digital Dimmer 120V AC 60Hz Only UR
DESCRIPTION CAT. NO. RATING COLOR*
Mural Scene Capable Incandescent/Magnetic MCM06-1L 600W/VA I, W, A
Low-Voltage Dimmer with LED Locator (G, E, B with Kit)
and LED Brightness Display
Mural Scene Capable Incandescent/Magnetic MCM10-1L 1000W/VA I, W, A
Low-Voltage Dimmer with LED Locator (G, E, B with Kit)
and LED Brightness Display
Mural Scene Capable Mark 10
™
Preset Dimmer MCX10-1LW 1000VA W
for 120V AC Advance Mark 10
™
Powerline
(750W) (I, A, G, E, B with Kit)
Fluorescent Dimming Ballast with LED
Locator and LED Brightness Display
Color Change Kits for Mural MC DRKDD-1L
—
I, W, A, G, E. B
Scene Capable Dimmer
See Page C8 for more information on Leviton Power Extenders
4.13 (104.9)
2.67 (67.8)
2.38 (60.5)
1.32
(33.6)
3.28 (83.3)
MCM06-1LW
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included with
each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly con-
nected to the load as indicated by the device’s wiring instructions.
CAUTION ON RETROFITS: When retrofitting Mark 10
™
Powerline
dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent dam-
age to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark 10
™
dimmer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com