Sylvania D3208 Switch User Manual


 
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
Lighting Controls
C
24
TOUCHPOINT
LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz
Commercial Grade Lighting Controls
TouchPoint Decora-Style Preset Digital Touch-Pad Dimmer
All TouchPoint dimmers provide single-pole (1 location) and 3-way (multi-location) control when
used with Multi-Remote unit. All dimmers feature Brightness LEDs and a Locator LED.
TouchPoint Digital Touch-Pad Dimmer 120V AC 60Hz Only UR
DESCRIPTION CAT. NO. RATING COLOR*
TouchPoint Incandescent TPI06-1L 600W I, W, A, G, E
TouchPoint Incandescent TPI10-1L 1000W I, W, A, G, E
TouchPoint Magnetic Low-Voltage TPM06-1L 600VA (450W) I, W, A, G, E
TouchPoint Magnetic Low-Voltage TPM10-1L 1000VA (800W) I, W, A, G, E
TouchPoint Advance Mark 10
TPX06-1L 600VA I, W, A, G, E
Fluorescent Dimming Ballast
TouchPoint Advance Mark 10
TPX10-1L 1000VA I, W, A, G, E
Fluorescent Dimming Ballast
Multi-Remote Unit for Multi-Location Dimming MS00R-10W No load White, for
(no LED locator or display) rating other colors
use Color
Change Kits
Color Change Kits for Multi-Remote Units DRK0R-00
I, W, A, G, E
(no LED locator or display)
See Page C8 for more information on Leviton Power Extenders
4.13 (104.9)
2.67 (67.8)
2.38 (60.5)
1.38
(35.1)
3.28 (83.3)
TPI10-1LW
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included with
each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly con-
nected to the load as indicated by the device’s wiring instructions.
CAUTION ON RETROFITS: When retrofitting Mark 10
Powerline
dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent dam-
age to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark 10
dimmer.
Use Leviton Power Extenders to extend
the load capacity of box-mounted dim-
mers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10
Powerline
fluores-
cent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
SPECIFICATIONS AND FEATURES
• New advanced digital touch pad technology provides
full range dimming by responding to where your
finger is placed on the pad
• Provides single-pole (one-location) and multi-location
full range dimming when used with MS00R remote
unit
• Attractive Decora styling blends with any interior
• Digital circuitry provides Soft-ON/Fade-OFF switching
for and eye-pleasing effect and extended lamp life
• Compatible with Decora screwless and Decora
standard designer wallplates
• Locator LED is illuminated when lights are OFF (no
LED on Remote Unit)
• Easy-to-read LED display alongside touch pad
indicates selected brightness level
• Minimum Brightness Adjustment sets comfortable
minimum light level
• Protected memory maintains light levels after power
outages and during minor power fluctuations
• Built-in radio/TV interference filter
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Add suffix to catalog number as follows for colors:
Ivory (-I), White (-W), Gray (-G), Black (-E), and
Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com