Filter
Top Products
WiJET.G Technical Manual
22
Subnet mask: In Automatic-DHCP mode, this value will be the default subnet mask if
no DHCP server is found. In Manual-Static mode, this value will be the unit’s fixed
subnet mask.
Default Gateway:
In Automatic-DHCP mode, this value will be the default gateway if no
DHCP server is found. In Manual-Static mode, this value will be the unit’s fixed default
gateway.
Account Settings
User Name: User is able to change the login name for the device. The limit is 16
characters for this field.
Enter New Password:
User is able to change the password of the WiJET.G. The
default is “public”. The limit is 16 characters for this field.
Confirm New Password:
Retype desired password for confirmation.
Reboot WiJET.G:
This will reboot the WiJET.G. Note that it will not change the User
name or password if you did not click Apply beforehand.
4.3.4 Firmware and Banner Page Upload
When you click on the Firmware and Banner Page hyperlink, you should see the web
page as shown in figure 4.6.
Figure 4.6: Firmware and Banner Page Upload