Filter
Top Products
Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide 51
Removing the Touchscreen Control Board
1. Remove the PSU by following the procedure described on page 49.
2. Detach the black tape from the touchscreen control board cables.
3. Push th
e tabs securing the touchscreen control board.
4. Remove the touchscree
n control board and turn it over to expose the cable connectors underneath it.
A circuit board that is >10 cm
2
has been highlighted with a yellow rectangle as shown in the
above image. Follow local regulations for disposing this type of circuit board.