Filter
Top Products
54 Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide
Removing the LCD Assembly
1. Remove the I/O cable plate by following the procedure described on page 28.
2. Remove the optical drive by following the procedure described on page 29.
3. Remove the scaler board by following the procedure described on page 31
4. Remove
the USB/audio board by following the procedure described on page 33.
5. Remove the mainboard by following the procedure described on page 47.
6. Remove the PSU by following the procedure described on page 49.
7. Discon
nect the IR cable from the front bezel.
8. Discon
nect the light bar cables from the light bars.
9. Remove the spea
kers.