Packard Bell W7 Laptop User Manual


 
4
Battery and AC Adapter
To remove the battery, do as follows:
1. Turn off the computer.
2. Disconnect the AC adapter.
3. Remove the battery.
Removing the Hard Disk Drive
To remove the hard disk drive, perform the following steps:
1. Remove two screws (2xA) from the HDD cover (as shown in Fig. 1).
2. Remove the HDD cover.
3. Remove one screw (1xB).
4. Slide the HDD to the left, away from its connector. Then lift it out.
5. Remove four screws (4xC) from the HDD bracket.
6. Remove two screws (2xD) from the HDD bracket.
7. Remove the HDD bracket and connector.
Fig. 1 The bottom base.
Fig. 2 Removing the hard disk drive.