Filter
Top Products
Feature & Display
Transfer greeting message
(checking, recording or erasing)
TRNS-GREETING
CHECK [±]
Setting the message transfer
To transfer a recorded incoming
message to another telephone
(p. 66).
MESSAGE TRANS.
MODE=OFF [±]
See page 66 for details.
#61
CHECK
RECORD
ERASE
Features Summary
74
Advanced features (cont.)!
How to set menu options
Note:
●
Step 3 may be slightly different depending on the
feature.
●
See page 67 for more details.
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Programming table (cont.)
Code Settings How the unit operates
1. Follow steps 1 and 2 above.
2.
Press + or -
to select “ON”.
3. Press
w
.
4. Enter the transfer telephone
number.
5. Press
w
.
6. Press
p
.
●
This feature can be turned on/off
from a remote location (p. 61).
#60
ON
OFF
(The default setting is in bold type.)
#67
Setting the incoming message
monitor
To hear an incoming message
(ICM) from the speaker when the
answering device is recording the
message.
ICM MONITOR
MODE=ON [±]
ON
OFF
If you select “OFF”, you cannot
monitor the incoming message.