Filter
Top Products
Feature & Display
Features Summary
75
Code Settings How the unit operates
(The default setting is in bold type.)
See page 50 for details.
#70
Calling your pager
If you have a pager and wish to
know when your unit receives a fax
or an incoming message, activate
this feature.
PAGER CALL
MODE=OFF [±]
ON
OFF
#78
Changing the TEL/FAX delayed
ring setting
If you use an extension telephone
in TEL/FAX mode, select the
desired number of rings of the
extension telephone.
TEL/FAX RING
RINGS=2 [±]
1, 2, 3, 4
#80
Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
YES
NO
See pages 48 and 49 for details.
1. Follow steps 1 and 2 on page 74.
2. Press
+ or - to select “YES”.
3. Press w.
4. Press w again.
5. Press
p.
You can confirm the status of the
other party’s machine.
●
If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
●
The connecting tone volume
cannot be adjusted.
#76
Setting the connecting tone
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
MODE=ON [±]
ON
OFF
#77
Changing the receiving mode in
the AUTO ANSWER setting
AUTO ANSWER
MODE=TAD/FAX [±]
TAD/FAX
FAX ONLY
TEL/FAX
“TAD/FAX”: Telephone Answering
Device/Facsimile mode (p. 54)
“FAX ONLY”: Facsimile only mode
(p. 47)
“TEL/FAX”: Telephone/Facsimile
mode (p. 48, 49)