Filter
Top Products
17
How to Use the On Screen Menu
The screen displays eight types of information: input signal status, picture/volume adjusting menu status,
sharpness display, FUNCTION display, audio level meter display, menu display, TIME CODE display and CLOSED
CAPTION display.
_ 2D mode
1. Main window , sub-window indication
• Indicates whether the main window or sub-window
is displayed.
•
In split screen display, the screen synchronized to the
reference sync changes with the input signal format
and “TWO WINDOW SIZE” settings (
J
page 47
).
The screen synchronized to the reference sync is
displayed in white and the screen that is not
synchronized is displayed in yellow.
2. The selected input line (J page 13, )
• VIDEO, SDI1, SDI2,
YP
BPR/RGB-VIDEO/RGB-COMP.
DVI-VIDEO/DVI-COMP.
•
Use “STATUS DISPLAY” in the “SYSTEM CONFIG”
menu to set the display status (
J
page 32).
3. Various indications (FILM mode)
• This indicates that “GAMMA SELECT” is set to
“FILM” in the “VIDEO CONFIG” menu.
4. Signal format
•
Use “STATUS DISPLAY” in the “SYSTEM CONFIG”
menu to set the display status (
J
page 32).
• “UNSUPPORT SIGNAL
”
appears if an unsupported
signal is input. It may also indicate that the format
selected in the “INPUT SELECT
”
menu does not
match the input signal.
• “NO SIGNAL
”
appears if no signal is input.
Note:
“UNSUPPORT SIGNAL
”
and “NO SIGNAL
”
may
not be properly displayed.
5. Various indications (Lock status)
• This indicates that “CONTROL” is set to “REMOTE”
in the “CONTROL” menu.
_ 3D mode
6. 3D display
• This indicates that “SYSTEM” is set to “3D” in the
“3D” menu.
7. 3D INPUT TYPE display
• This indicates the “3D INPUT TYPE” of the “3D”
menu
8. SIMUL MODE display
•
This indicates the options for “SIMUL MODE” when
“3D INPUT TYPE” is set to “SIMUL” in the “3D” menu.
9. H SHIFT display
• This is displayed when the “3D INPUT TYPE” of the
“3D” menu is set to “SIMUL” and the SDI2 signal is
being shifted horizontally using “H SHIFT”.
10. SDI1 (L) display
•
This indicates the format of the signal input from the
SDI1 (L) terminal. When SIMUL is selected,
synchronization is performed based on the left signal.
11. SDI2 (R) display
•
This indicates the format of the signal input from the
SDI2 (R) terminal. When SIMUL is selected,
synchronization is performed based on the left signal.
12. (L)(R) display
• This displays left and right information when a
signal that has left and right information
superimposed (such as AG-3DA1) is input through
SDI1.
If left and right input is mistakenly reversed, it is
displayed in yellow.
Left and right information is not displayed if it is
input through SDI2 only.
Input signal status
7
SIMUL LINE BY LINE
SDI1(L): 1080/59.94i(L) SDI2(R): 1080/59.94i(R)
3D
6
7
89
10
11
3
5
12
12
BT-3DL2550PE(VQT2U10)_E.book 17 ページ ２０１０年７月８日 木曜日 午後２時１２分