Filter
Top Products
20
CONTROL LOCK
7 CONTROL LOCK
Invalidates most of operations on the front panel
(including menu screen operations).
OFF : Enables normal operations.
ON : Invalidates all operations except the power switch and
CONTROL LOCK.
NOTE:
While CONTROL LOCK is set to ON, only the following operations
are available:
–turning the monitor’s power ON or OFF.
–displaying the SET-UP MENU to set CONTROL LOCK to OFF.
Attempting to perform any other operation causes the “
Control
lock on!” warning to appear on the screen for approx. 3 seconds.
all reset
Resets all SET-UP MENU items to factory-preset
values.
1. Select “all reset” by / buttons, then press button.
Confirmation message is displayed.
2. To initialize, press button.
To cancel the initialization, press the MENU button.
STATUS DISPLAY
Sets the status display ON/OFF.
* Switches the display on and off. Also selects the type of
display.
Press the button to
display the setting menu
illustrated on the right.
7 STATUS DISPLAY
Sets the status display ON or OFF.
ON : The information is displayed.
OFF : The information is not displayed.
HOW TO USE “SET-UP MENU” (cont’d)
<STATUS DISPLAY>
STATUS DISPLAY :ON
EXIT:
MENU
ADJUST:– + SELECT:
LCT1464-001A_EN_16-21-B 03.9.19, 14:4620