Filter
Top Products
MENU
EXIT
SEL.
ENTER
ENTER
[SYSTEM CONFIG]
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
BACKLIGHT
--
PEAKING
3SEC OFF
OFF
FACTORY
USER1
LAST
MENU
EXIT
SEL.
ENTER
SET
[
SETUP SAVE
]
USER1
YES
NO
MENU
EXIT
SEL.
ENTER
ENTER
[SYSTEM CONFIG]
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
BACKLIGHT
--
PEAKING
3SEC OFF
OFF
FACTORY
USER1
LAST
MENU
EXIT
SEL.
ENTER
SET
[
SETUP LOAD
]
USER1
YES
NO
15
Changes to green Changes to green
User Data
You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 combinations
of screen adjustment values as user data. You can also return the setting values and adjustment values to the
factory preset settings.
The following settings are included in user data.
• Menu settings except for “SETUP LOAD/SAVE” and “REMOTE of CONTROL” (including the button function
settings on the front of the monitor)
• Screen adjustment values changed in picture adjusting knob
Saving user data Loading user data
4. Push [ , ] to select the file you wish to save to
from “USER1” – “USER5”, then push [ENTER].
The following screen appears.
1. Push [MENU] to display the MAIN menu.
2. Push [
, ] to select the “SYSTEM CONFIG”
menu and push [ENTER].
3. Push [ , ] to select the “SETUP SAVE” sub
menu and push [ENTER].
The setting values in the sub menu change to
green.
5. Select “YES”, and push [ENTER].
The user data is saved.
1. Push [MENU] to display the MAIN menu.
2. Push [ , ] to select the “SYSTEM CONFIG”
menu and push [ENTER].
3. Push [ , ] to select the “SETUP LOAD” sub
menu and push [ENTER].
The setting values in the sub menu change to
green.
4. Push [
, ] to select the file you wish to load to
from “USER1” – “USER5”, then push [ENTER].
The following screen appears.
To return to the factory preset setting values, select
“FACTORY”.
5. Select “YES”, and push [ENTER].
The user data is loaded.
To return to the previous screen
Push [MENU].