Panasonic BT-LH80WP Computer Monitor User Manual


 
20
Main Menu (continued)
About IP Mode
By selecting “MODE1”, you can convert IP through Frame Interpolation.
This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused
1 frame delay or more.
Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare
cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.
By selecting “MODE2”, you can convert IP through Field Interpolation.
Since MODE2 interpolates only within each Field, it is suitable to confirm interlace condition.
Depending on still images, etc., flickers may occur on the screen. In such a case, “MODE1” is recommended.
WB adjustment mode
You can adjust “WHITE BALANCE VAR1” - “WHITE BALANCE VAR3” (WB) by selecting “VAR1” - “VAR3” in
“COLOR TEMP.” in the “VIDEO CONFIG” menu.
The underlined values are factory preset setting values.
Sub menu Settings Explanation
COLOR TEMP.
1
USER 0 - 63
D93
D65
D56
Used to select the color temperature that will become the
basis for adjustments.
<USER 0 - 63> Adjustable settings 0 - 63
(color temperature around 3000K - 9300K)
<D93> Color temperature around 9300K
<D65> Color temperature around 6500K
<D56> Color temperature around 5600K
GAIN RED 0 - 511
(Factory presets
are values for color
temperature <D65>.)
The presets are
values adjusted
before shipment from
factories.
GAIN elements for RED are adjusted.
2
GAIN GREEN
GAIN elements for GREEN are adjusted.
2
GAIN BLUE
GAIN elements for BLUE are adjusted.
2
BIAS RED –512 - 511
(Factory preset settings:
0)
BIAS elements for RED are adjusted.
2
BIAS GREEN
BIAS elements for GREEN are adjusted.
2
BIAS BLUE
BIAS elements for BLUE are adjusted.
2
RESET “GAIN RED” - “BIAS BLUE” values are reset to color temperatures
values selected in “COLOR TEMP.”.
1 When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the
confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the
selected color temperature values.
2 When adjusting, the item display moves to the lower part of the screen.