Panasonic C264 Copier User Manual


 
34
Chapter 1 Basic Menu Features
Storing a Job in Memory
A copy job can be registered as a preset job. It is useful to register the frequently used settings as
Preset jobs.
zRefer to the Recalling a Preset Job Stored in Memory (see page 35).
zOnce registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
zA proof copy job cannot be registered in the job memory.
zM1”/”M2” cannot be registered when Manual Skyshot Mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
1
Place original(s).
zRefer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features (see pages 8
to 33 and 40 to 89).
4
Enter the desired number of copies.
5
Select “Preset Jobs”.
6
Select “Save”, and then select a job
button that does not have a job
registered.
zThe job button, in which a job has been
registered, will have a job name.
7
Input a job name, and then select
OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) on the provided CD-ROM.
zAfter completing the editing of the job name,
press the Reset key to return to the initial
screen of the current active mode.