Filter
Top Products
71
Chapter 2 More Menus Features
Image Repeat
Create multiple images on the sheet from single original.
zYou can change to have dotted lines printed between each copy images. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
zThis function can be selected when the original is placed on the platen.
zAs the original is placed on the platen, the position of the original may be erroneously detected if influenced by
ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and then place original(s) on the
platen, leave it open.
zRefer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select “Zoom / Effects”, and then
select “Image Repeat”.
5
Select the desired type of paper, and
then select “OK”.
6
Enter the desired number of copies.
7
Press the Start key.
zAfter finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
The minimum size of the
original is 20 mm x 20 mm.