Filter
Top Products
82
Chapter 2 More Menus Features
5
Select the registered form, and then
select “OK”.
zFor the details about how to register the
form, refer to the Save (see page 83).
zWhen Hard Disk Drive is not installed, the
screen of step 5 is not displayed.
(Hard Disk Drive is standard equipment for
DP-C354/C264. It is optional equipment for
DP-C323/C263/C213.)
6
Set the order of overlay form and the
scanned original, and then select
“OK”.
7
Enter the desired number of copies.
8
Press the Start key.
zWhen copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
zAfter finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Overlay
on Top
Copied with the scanned original
overlaid on the form.
Overlay
on Bottom
Copied with the form overlaid on
the scanned original.