Filter
Top Products
90
Chapter 3 Other Features
Reserving the Next Copy Job while the
Current Copy Job is Progressing
The next copy job can be reserved while the current copy job is under way.
zIf Hard Disk Drive is not installed, this function is not available.
(Hard Disk Drive is standard equipment for DP-C354/C264. It is optional equipment for DP-C323/C263/C213.)
zThe previous copy job settings can be saved if the Function Parameter “41 Reserve a Job Settings” (Copier
Settings > Key Operator) is set to “Save”. This is useful when using the previous copy job settings to the next
copy job.
zTo save the previous copy job settings, refer to Copier Settings (For Key Operator) in the Operating
Instructions (For Function Parameters) on the provided CD-ROM.
1
Place the next original while copying
current job.
2
Select “Reserve a Job”.
3
Select copy features if necessary.
4
Enter the desired number of copies.
5
Press the Start key.
zWhile the current job is progressing, the
next copy job will be scanned and stored
into the Hard Disk Drive.