Filter
Top Products
67
LAN
Enabling/Disabling the Wake Up from wired LAN function
When the Wake Up from wired LAN function is enabled, the computer automatically resumes from sleep
*2
or hibernation
when the computer is accessed from the network server via the internal LAN port. (Default setting)
The Wake Up from wired LAN function can be switched to enable/disable by performing the following procedure.
1
Click (Start) - [Computer] - [System properties] - [Device Manager].
z A standard user needs to enter an administrator password.
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager].
2 Double-click [Network adapters] - [Intel(R) 82577LM Gigabit Network Connection], and
click [Power Management].
3 Select the setting for [Allow the computer to turn off this device to save power] and
[Allow this device to wake the computer]
*3
, and click [OK].
z We recommend you to make the above 2 settings ON/OFF simultaneously.
NOTE
z The computer may start up if accessed by another computer on the network.
The following procedure can be used to prevent startup due to unintentional access by a computer.
A
Click (Start) - [Computer] - [System properties] - [Device Manager].
z A standard user needs to enter an administrator password.
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
B Double-click [Network adapters], and double-click the internal network adaptor.
C Click [Power Management], add a check mark for [Only allow a magic packet to wake the computer]
*4
, and then
click [OK].
*2
Windows XP: standby
*3
Windows XP: [Allow this device to bring the computer out of standby]
*4
Windows XP: [Only allow management stations to bring the computer out of standby]