Panasonic CF-52 Personal Computer User Manual


 
24
CD/DVD Drive
Disc handling care
z Do not use deformed, warped, or irregularly shaped discs.
Reading of disc may not be possible depending on the disc conditions (cracks, dirt, modification, data recording quality,
copy protection, recording equipment/software that was used to create the disc, etc.)
z Before using a disc, carefully read the operating/handling instructions and package of the disc.
z If the discs are not handled appropriately, they may become dirty or scratched. Furthermore the writing speed may get
slower and the data may not be correctly written on or read from the disc. Other damage may cause a drive failure.
z Note the following precautions.
Do not touch the disc surface (the side with no printing).
Keep the disc surface clean and free from dirt, dust, fingerprints and scratches.
Do not write on the surface of the disc with a ballpoint pen or other writing instrument.
Do not attach stickers to discs.
Do not drop, bend, or place heavy objects on top of discs.
Do not place or store discs in locations exposed to heat, direct sunlight, humidity or dust.
If a disc is brought from a cold to a warm location, condensation may form on the disc. For read-only discs, wipe off the
condensation using a soft, dry, lint-free cloth before using the disc. For recordable/rewritable discs, wait until the conden-
sation dries.
When not using discs, keep them in their protective cases or cartridges.
<For read-only discs>
Wipe discs with a dry, soft cloth from the center toward the edge.
If discs get very dirty, wipe with a moist, soft cloth from the center toward
the edge, then wipe again with a dry cloth to take up remaining moisture.
<For recordable/rewritable discs>
Use the disc for recordable/rewritable discs cleaner to clean these discs.
Do not use a cloth, CD cleaners or any other such cleaners under any circumstances.
To clean discs
How to hold a disc