Filter
Top Products
65
LAN
CAUTION
z Do not connect the telephone cable to the LAN port.
1 Turn off the computer.
z Do not use sleep
*1
or hibernation.
2 Open the cover (A) and connect the cable.
Connect the LAN port (B) and the network system (server, HUB, etc.) using a LAN cable.
3 Turn on the computer.
To check the Local Area Connection status
A Click (Start) - [Control Panel] - [View network status and tasks].
A Click [start] - [Connect To] - [Show all connections].
NOTE
z When these functions are enabled, power is consumed even if the computer is in sleep
*1
, hibernation, or powered off.
Be sure to use the AC adaptor.
z Even when a password is set in the Setup Utility and [Password On Boot] is set to [Enabled], entering the password is
unnecessary for turning on or resuming the computer.
z The Power On by LAN function is off under the following conditions:
• When you turn the computer off by pressing the power switch for 4 seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
z The screen remains dark when the computer resumes from sleep
*1
. The previous screen display will be restored when
you touch the keyboard or touch pad.
*1
Windows XP: standby
Connecting LAN
Power On by LAN/Wake Up from wired LAN