Panasonic CF-52 Personal Computer User Manual


 
38
SD Memory Card
z This computer supports SDHC Memory Cards (SD Memory Cards with a capacity more than 2 GB).
z When you use a miniSD Card or a microSD Card, set the card to a miniSD Card adaptor or a microSD Card adaptor, and
insert/remove the card with the adaptor. Be sure not to leave the adaptor in the card slot.
z The SD Memory Card has a copyright protection function which is compatible with content on-demand services on the
Internet, etc.
z To format the SD Memory Card on this computer, do not use [Format] of Windows, but use the SD Memory Card format
software.
You can download the software from the web site below.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
z To use the SD Memory Card on other devices, format the card on the devices. For further information, refer to the instruc-
tion manual of the devices.
CAUTION
z Do not remove or insert the SD Memory Card until Windows has completed loading.
z Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.
While the computer is in sleep
*1
or hibernation.
While the SD Memory Card indicator is on.
While data is being read from or written to the card.
Immediately after the writing operation. The computer may still continue the access to the card just after writing
operation. If you remove the card before the operation is completed, the data may be damaged or the card access
may no longer be performed normally.
z Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages,
direct or indirect.
z Do not forcibly draw out the card, otherwise the slot may be damaged.
z Insert the card in the correct direction, otherwise the card and the slot may be damaged.
z After resuming from sleep
*1
or hibernation, do not access the SD Memory Card for approximately 30 seconds.
*1
Windows XP: standby
SD Memory Card Information
Inserting/Removing the SD Memory Card