Filter
Top Products
9-6
9.1.15. Removing the USB PCB
1. Disconnect the Cable from the Connector (CN1701).
2. Remove the two Screws <N9>.
3. Remove the USB PCB.
Screws <N9>: DFHE5025XA
9.1.16. Removing the Display unit
1. Remove the four Screws <N6> from the computer bottom
side.
2. Remove the two Screws <N6> from the computer upper
side.
3. Remove the Display Unit.
4. Remove the Hinge Screw Cover L and R.
5. Remove the Gasket.
Screws. <N6>: DXSB3+6FNL
9.1.17. Removing the LCD Front Cabinet
1. Remove the two LCD Leg Rubbers, and then the two
Screws <N16>.
2. Remove the two Screws <N15>.
3. Release the 23 Hooks joining the LCD Front and Rea
r
Cabinet on the LCD Front Cabinet outward. (See the Fig-
ure),
4. Remove the LCD Front Cabinet.
Screws <N15>: DRHM0075ZA
Screws <N16>: DXQT2+G4FCL
9.1.18. Removing the LCD and the Inverter
<N9>
USB PCB
CN1701
<N6>
<N6>
<N6>
<N6>
Display Unit
Gasket
Hinge
Screw
Cover L
Hinge
Screw
Cover R
<N16>
<N15>
<N15>
LCD Leg
Rubber
LCD Front
Cabinet
LCD Unit
LCD Leg Rubber
LCD/INV. Cable
Inverter
Inverter Case
LCD Unit
<N18>
<N18>
LCD Rear Cabinet
W-LAN PCB L
W-LAN PCB R