Panasonic CF-T2 Personal Computer User Manual


 
11
Getting Started
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding
of some basic computer-related operations.
1
Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or are not working properly, contact your technical support office
( page 38).
Model No : CF-AA1623A
AC adaptor ..........1
Model No :CF-VZSU24/
CF-VZSU24A
AC Cord ...............1
Battery Pack........1
Product Recovery
CD-ROM
Modem Telephone
Cable ...................1
Windows
®
Book .... 1
Operating Instructions
(This book)
.................... 1
Windows XP .......3
Windows 2000 ....2
3
Turn the computer over and insert the battery pack.
Make sure the battery pack is facing the correct direction, slide it in the direction of the
arrow, and then check to ensure that the battery pack is held firmly by the latches on
the left and right sides.
Latches
CAUTION
Be sure the battery pack is properly connected to the connector.
Do not touch the terminals on the battery pack and the computer. The battery
pack may no longer function properly if the contacts are dirty or damaged.
Also, the computer may not operate properly.
Before using the battery pack, carefully read “Precautions (Battery Pack)”
( page 6).
2
Read the LIMITED USE LICENSE AGREEMENT. ( page 28)
Before removing the seal covering the power switch, read the LIMITED USE LICENSE
AGREEMENT.
Battery Pack
Refer to page 10 for details on the carrying cloth for protecting the keyboard.
4
Open the display.
1 Slide the latch located at the front.
2 Lift open the display.
CAUTION
Do not open the display wider than necessary (160° or more).
Do not apply excessive pressure to the LCD. Also, do not hold the LCD when
opening or closing the display.
Latch
2
1
<Only for models with touchscreen>
( “Touchscreen”)
Soft Cloth .................................. 1
Stylus .....................................1