Filter
Top Products
25
Troubleshooting
When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly.
• Key combination with Fn may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
In this case, log off all users, and try the operation once more. If the problem persists,
restart the computer.
Some applications may not
work properly
Fast User Switching Function Windows XP
Press Ctrl + Shift + Esc to open Task Manager and close the software application
which is not responding.
After shutting down by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
Windows XP : [start] - [Control Panel] - [Add or Remove Programs]
Windows 2000 : [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
No response
Others
SD Card Setup (SD memory card security function)
Cannot log on with the SD
memory card
Windows logon user name and password are not set in the SD memory card correctly.
Enter the Windows user name and password without using the SD memory card. After
logging on, reset the SD memory card, or use the [Control Panel] to create a user with the
user name and password set on the SD memory card. ( “SD Memory Card/
MultiMedia Card”)