Filter
Top Products
Connections and Setup
23
For Fax Advantage assistance, call 1-800-435-7329.
How to receive calls with the handset
1 When the fax machine rings, lift the handset
and press {TALK} or {SP-PHONE}.
2 When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press {*}{#}{9} (pre-
selected fax activation code) firmly.
L A single beep will be heard.
L The fax machine will start fax reception.
Note:
L To receive fax documents using the handset,
you must set the remote fax activation to on
(feature #41, page 90) beforehand.
L You can change the fax activation code in
feature #41 (page 90).
When you are OUT of the
house or office
How to set up
1 Set feature #77 to TAD/FAX mode
(page 92) beforehand.
2 Press {AUTO ANSWER} until the following
is displayed.
L The display will show the number of
rings before the unit answers a call in
TAD/FAX mode.
L If necessary, press {+} or {-} to select
the desired ring setting and press
{SET}.
How to receive calls
If the call is a phone call, the fax machine will
record a voice message automatically.
If a fax calling tone is detected, the fax machine
will receive a fax automatically.
Note:
L Do not connect an answering machine to the
same telephone line. If connected, set
automatic answer feature to off.
L Do not subscribe to Voice Mail service.
L If you have already subscribed to Distinctive
Ring service, refer to page 66.
L If the fax machine is used only for fax
reception, refer to page 64.
ON
OFF
TAD/FAX MODE
2 RINGS