Filter
Top Products
PROGRAMMING YOUR MACHINE
35
PROGRAMMING
YOUR MACHINE
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
02 RESOLUTION *1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
05 MEMORY 1 Off Setting the home position for the MEMORY.
*2 On
06 DIALING METHOD 1 Pulse Selecting the dialing method.
*2 Tone
07 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
08 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2From To
10 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
12 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM. Journal
Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
2Always
*3 Inc. only
13 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal automatically
after every 40 transactions.
*2 Valid
17 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
*2 Auto
22 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording paper is
jammed.
*2 Valid
24 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto: Reduce received document according to the length of
received documents.
*2 Auto
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is selected on
Fax Parameter No. 24.
---- ----
*100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling. (See page 63)
Continued on the next page.
Fax Parameters