Filter
Top Products
NETWORK FEATURE
78
Using Manual Number Dialing
Use to separate the Telephone number and the Sub-Address
(see Note 1) (see Note 2) (see Note 3)
Make sure that the FAX Mode indicator is ON. If not, press to select the "FAX MODE".
1
a
Set the original(s) face up on the ADF.
1
b
Place a book or an original face down on the
Platen Glass.
2
Enter the telephone number, press
then enter the Sub-Address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex:
Telephone number = 5551234, Sub-Address = 2762
Enter as:
3
The document(s) are stored into memory and your
machine starts to dial the number of the station and sends
the document(s) with Sub-Addressing information.
NOTE
1. separates the Sub-Address from the Telephone number and is indicated by an "s" in
the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-Addressing Transmission.
3. The Sub-Address is not transmitted during Manual Redial Mode.
FLASH/SUB-ADDR
FAX
ENTER STATION(S)
THEN PRESS START 00%
OCT-12-2000 15:00
00%
FLASH/SUB-ADDR
5 5 5 1 2 3 4
FLASH/SUB-ADDR
2 7 6 2
TEL. NO.
5551234s2762
❚
START
* STORE * NO. 001
PAGES=001 01%
FLASH/SUB-ADDR
Sub-Addressing