Filter
Top Products
NETWORK FEATURE
NETWORK
FEATURE
149
Using Manual Number Dialling
Use to separate the Telephone number and the Sub-Address.
(see Note 1) (see Note 2) (see Note 3)
Make sure that the FAX lamp is ON. If not, press to select the "FAX MODE".
1
a
Place original(s) face up on the ADF.
or
1
b
Place a book or an original face down on the Platen
Glass.
2
Enter the telephone number, press
then enter the Sub-Address (up to 20 digits).
(Up to 36 digits including telephone number,
pauses, spaces, FLASH and Sub-Address)
Ex:
Telephone number = 5551234, Sub-
Address=2762
Enter as:
3
The documnet is stored into memory and your
machine starts to dial the number of the station and
sends the document(s) with Sub-Addressing
information.
NOTE
1. separates the Sub-Address from the Telephone number and is indicated by an "s" in the display.
2. Manual Off-Hook or On-Hook Dialling cannot be used with the Sub-Addressed Transmission.
3. The Sub-Address is not transmitted during Manual Redial Mode.
SUB-ADDR
SUB-ADDR
5 5 5 1 2 3 4
SUB-ADDR
2 7 6 2
MEMORY XMT STN(S):0000
5551234
S
2762
JOB
STATUS
MEMORY XMT
XMT MODE ORIGINAL
LIGHTER DARKER
1/1
AMERICA ASIA CHINA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
FLASH
Sub-Addressing