Filter
Top Products
PROGRAMMING YOUR MACHINE
34
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
2Auto
022 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when the
recording paper runs out, toner runs out or the recording paper is
jammed.
2 Valid
024 PRINT REDUCTION 1 Fixed Selecting the print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto: Reduce received document according to the length of
received originals.
2Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected
on Fax Parameter No. 24.
---- ----
100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling. (See page 77)
027 POLLED FILE SAVE 1 Invalid Selecting whether the machine retains the polled document(s) in
memory even after the document(s) is polled once.
2 Valid
028 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the originals when storing
into memory.
(depending on the Stamp setting on the Control Panel)
2 Valid
031 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether the machine retains the document in memory if
it is not successfully transmitted.
2 Valid
033 XMT REDUCTION 1 Invalid Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
receiving machine.
2 Valid
037 RCV TO MEMORY
(----)
Enter a 4-digit password for printing the received document(s) in
memory by using
.
When is set to ON, this parameter
is not selectable on the LCD display. (See page 104)
042 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether the machine saves the confidential polled file
even after the file is polled once.
2 Valid
043 PASSWORD-XMT 1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
station when transmitting. (See page 128)
2On
044 PASSWORD-RCV 1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 130)
2On
046 SELECT RCV 1 Invalid Selecting whether the machine performs selective reception. (See
page 125)
2 Valid
052 DIAGNOSTIC
PA S S W O R D
(----)
Setting the password for Remote Diagnostic Mode. Please ask
your Panasonic Authorized Dealer for details.
No. Parameter
Setting
Number
Setting Comments
FUNCTION
SELECT MODE
06 RCV TO MEMORY
06 RCV TO MEMORY
Customizing Your Machine